<< Click here to display Table of Contents >> Navigation: TachoScan module > Main menu > TachoScan > [105] From external device > TachoReader Mobile/Combo > TR Mobile - download procedure:

Download from driver card

Contents

To download driver card data:

1.Turn the vehicle key in the position II (ignition) – the control lamps on the instrument board flash (tachograph activation).

It is recommended to perform this step together with the driver.

2.Insert the company card into slot 1 or 2 in the tachograph.

3.After reading the card in the tachograph confirm the message: "Lock tachograph yes/no."

4.Insert driver card from which data is to be retrieved into a free slot in the tachograph.

5.After recognizing the card by the tachograph, connect the TachoReader Mobile II device to the tachograph port.

For location of the port in the tachograph refer to the tachograph manual.

6.TachoReader Mobile II automatically proceeds to retrieve data (LED flickers green).

If, during data downloading, LEDs on the key light up in red, this means an error; see the topic: "Error codes".

7.After the download is complete, both LEDs on TachoReader Mobile II turn green (if there were errors while downloading, the LED turns red).

If the device signals data download error, repeat the download. If download error persists, please use another tachograph for downloading.

If the download in another tachograph is successful, take the tachograph returning faulty reading to the service.

If the incorrect reading is repeated also on another tachograph, please contact the TachoReader manufacturer service.

8.After the reading, unplug the unit from the tachograph, remove the company card and the driver card.

When you press the company card eject button, the tachograph asks: "Do you want to lock the tachograph?".

It is recommended to ALWAYS lock the tachograph to prevent unauthorized persons from downloading the data and locking the tachograph with another company card.