To download data from the tachograph:
Make sure that the "Driver card download via tachograph" option in the configuration window of TachoReader Mobile II device is unchecked, otherwise uncheck it.
|
|
1.Turn the vehicle key in the position II (ignition) – the control lamps on the instrument board flash (tachograph activation).
We recommend to perform these operation together with the driver.
|
|
2.Insert the company card / control card into slot 1 or 2 in the tachograph. 3.The tachograph detects the card. Confirm the checkback "Company lock yes/no". 4.Plug your TachoReader Mobile II into the tachograph interface.
Position of the interface within the tachograph - see tachograph manual.
|
|
5.The TachoReader Mobile II starts the download automatically (both LED flashing green).
Depending on the data range the download can take up to 1 hour time.
Flash the LEDs in the device with red light during the download then see: "Error codes".
|
|
6.After the download both LEDs beam green (they beam red by download faults).
Repeat the download when a download fault is signaled. When the repeated download is faulty as well, try to download data from another tachograph.
If the download from another tachograph is OK, the first tachograph may be disturbed (visit a tachograph service station).
When the second download is disturbed contact the service of the TachoReader manufacturer.
|
|
7.After reading, unplug the device from the tachograph and remove company card / control card.
After pressing the reject button, you are asked, if the company lock has to be activated.
It is useful to ALWAYS set the company lock, to avoid downloading of data by third parties (external persons could download data and lock the tachograph for their own company card).
|
|
|
|
